CU Amiga Super CD-ROM 25/CU Amiga Magazine's Super CD-ROM 25 (1998)(EMAP Images)(GB)(Track 1 of 2)[!][issue 1998-08].iso/CUCD/WWW/http/www.wirenet.co.uk/files/Wirenet15.lzx/UpdateWirenet

Text File | 1978-01-23 | 9KB | 296 lines

; $VER: UpdateWirenet 1.5 (21.10.96)
;
; This installer and the accompanying scripts are
; (c) Neil Bothwick, Wirenet Amiga Internet and may
; not be used in any other package without permission


;========================== Define Procedures ==========================

(set ArcName 'UpdateWirenet.lzx')
;;; Abort with message
(procedure GetOut GetOutMsg
        (message GetOutMsg)
        (exit (quiet))
)
;;;
;;; Check archive was unarced correctly
(procedure CheckUnarc
    (if (= 0 (exists 'Updates/Dashboard'))
        (GetOut
            (cat
                '\n' ArcName 'has not been unarchived correctly!\n\n'
                'Type\n\n"unlzx x ' ArcName ' RAM:"\n\nin a shell and then '
                'double click on the installer icon in RAM:'
            )
        )
    )
)
;;;
;;; Make environment variable
(procedure SetEnv EnvName EnvVal                                ; Creates environment variables in ENV: and ENVARC:
    (set ArcName (tackon 'ENVARC:' EnvName))
    (if (exists ArcName)                                        ; Back it up if it already exists,
        (if (not (exists (cat ArcName '.old')))                 ; has not been previously backed up
            (if (not(= EnvVal (getenv EnvName)))                ; and is not the same value
                (rename ArcName (cat ArcName '.old'))
            )
        )
    )
    (textfile
        (dest (tackon 'ENVARC:' EnvName))
        (append EnvVal)
    )
    (textfile
        (dest (tackon 'ENV:' EnvName))
        (append EnvVal)
    )
)
;;;

(CheckUnarc)                ; ensure archive was unpacked with paths preserved
(welcome)

;=========================== Install Scripts ===========================
;;; Introduction
(message
    (cat
        '\nHello ' (getenv 'REALNAME') '\n\n'
        'This will update your Wirenet software to the latest current setup.\n\n'
        'This uses a different method of storing your configuration information '
        'that will make it much easier to make any changes to your system later.\n\n'
        'This will also make future upgrades much simpler.'
    )
)

(message
    (cat
        '\nThe installer will attempt to read your existing configuration information.\n\n'
        'Please check these details carefully before proceeding with the installation. If you '
        'have any doubts about this, then abort the installation and contact\n\n'
        '[e-mail]\n\nbefore continuing.'
    )
)
;;;
;;; Read existing configuration
(working '\n\nReading your current configuration')
(if (<> 0 (run 'rx ReadConfig.rexx' (safe)))
    (run 'sys:rexxc/rx ReadConfig.rexx' (safe))
)
; Put values in variables
(set
    DevName
        (if (exists 'ENV:WirenetUpdateDevice' (noreq))
            (getenv 'WirenetUpdateDevice')
            ''
        )
    DevUnit
        (if (exists 'ENV:WirenetUpdateUnit' (noreq))
            (getenv 'WirenetUpdateUnit')
            ''
        )
    Speed
        (if (exists 'ENV:WirenetUpdateSpeed' (noreq))
            (getenv 'WirenetUpdateSpeed')
            ''
        )
    PopNum
        (if (exists 'ENV:WirenetUpdatePopNum' (noreq))
            (getenv 'WirenetUpdatePopNum')
            ''
        )
    Password
        (if (exists 'ENV:WirenetUpdatePassword' (noreq))
            (getenv 'WirenetUpdatePassword')
            ''
        )
)
; Remove temporary environment variables
(run 'delete >NIL: ENV:WirenetUpdate#?' (safe))
;;;
;;;Confirm configuration details
(procedure ConfirmConfig
    (set
        DevName
            (askstring
                (prompt '\nPlease enter the name of your serial device')
                (default DevName)
                (help 'This should be as you gave when installing the Wirenet package')
            )
        DevUnit
            (askstring
                (prompt '\nPlease select the unit number of ' DevName)
                (default DevUnit)
                (help '\nThis is usually 0')
            )
        Speed
            (askstring
                (prompt '\nPlease enter the speed of your serial connection')
                (default Speed)
                (help 'This should be as you gave when installing the Wirenet package')
            )
        ModemInit
            (askstring
                (prompt '\nPlease enter the initialisation string for your modem')
                (help 'This should be as you gave when installing the Wirenet package')
                (default 'ATZ')
            )
        ModemDial
            (askstring
                (prompt '\nPlease enter the dial string for your modem')
                (help 'This should be as you gave when installing the Wirenet package')
                (default 'ATDT')
            )
        PopNum
            (askstring
                (prompt '\nPlease enter your local access telephone number')
                (help 'This should be as you gave when installing the Wirenet package')
                (default PopNum)
            )
        Password
            (askstring
                (prompt '\nPlease enter your Password')
                (help 'This should be as you gave when installing the Wirenet package - unless you have changed it since then')
                (default Password)
            )
    )
    ; Verify information
    (askbool
        (prompt
            (cat
                'You gave the following details about your configuration\n'
                '\nDevice name: ' DevName
                '\nUnit number: ' DevUnit
                '\nSerial link speed: ' Speed
                '\nInitialisation string: ' ModemInit
                '\nDial String: ' ModemDial
                '\nTelephone number: ' PopNum
                '\nPassword: ' Password
                '\n\nPlease check these details carefully.'
            )
        )
        (help '\n\nPlease check these carefully.\n\nDo not proceed unless you are sure they are correct.')
        (choices 'Let me change them' 'They are correct')
    )
)

(while (ConfirmConfig))
;;;
;;; Create environment variables
(makedir 'ENV:Wirenet')
(makedir 'ENVARC:Wirenet')
(SetEnv 'MAILSERVER' 'mail.u-net.com')
(SetEnv 'NEWSSERVER' 'news.u-net.com')
(SetEnv 'SMTPSERVER' 'send.mail.u-net.com')

(if (not (exists 'ENV:MAILBOX'))
    (SetEnv 'MAILBOX' (cat (getenv 'USERNAME') '-' (getenv 'NODENAME')))
)
(setenv 'Wirenet/ModemDev' (cat DevName ' ' DevUnit))
(setenv 'Wirenet/ModemSpeed' Speed)
(setenv 'Wirenet/ModemInit' ModemInit)
(setenv 'Wirenet/ModemDial' ModemDial)
(setenv 'Wirenet/PopNum' PopNum)
(setenv 'Wirenet/ppp.options' 'CD 7WIRE EOFMODE')
(setenv 'Wirenet/Gateway' '193.119.176.1')
(setenv 'Wirenet/DialWindow' 'CON:20/50/400/160/Dialing.../INACTIVE')
(setenv 'Wirenet/MTU' '1500')
(setenv 'Wirenet/pap.config' (cat (getenv 'NODENAME') ' ' Password))
(if (exists 'S:PPP.key')
    (if
        (askbool
            (prompt '\nYou are using the registered version of ppp.device\n\nWould you like to use PAP logins?\n\n')
            (help '\nPAP (Password Authentication Protocol) provides for faster logins')
            (default 0)
        )
        (SetEnv 'Wirenet/UsePAP' 'true')
        (run 'delete >NIL: ENVARC:Wirenet/UsePAP')
    )
)
;;;
;;; Copy Dashboard
(copylib
    (prompt 'Updating Dashboard')
    (help @copylib-help)
    (source 'Updates/Dashboard')
    (dest 'AmiTCP:')
    (confirm)
)
(copyfiles
    (prompt 'Updating Dashboard')
    (help @copyfiles-help)
    (source 'Updates/Dashboard.gui')
    (dest 'AmiTCP:')
)
;;;
;;;Copy Connect
(copylib
    (prompt 'Updating Connect')
    (help @copylib-help)
    (source 'Updates/Connect')
    (dest 'AmiTCP:bin')
    (confirm)
)
;;;
;;; Copy Fetch
(copylib
    (prompt 'Updating Fetch')
    (help @copylib-help)
    (source 'Updates/Fetch')
    (dest 'AmiTCP:bin')
    (confirm)
)
;;;
;;; Copy SendEvents
(copylib
    (prompt 'Updating SendEvents')
    (help @copylib-help)
    (source 'Updates/SendEvents')
    (dest 'AmiTCP:bin')
    (confirm)
)
;;;
;;; Copy StartNet & StopNet
(copylib
    (prompt 'Updating StartNet')
    (help @copylib-help)
    (source 'Updates/StartNet')
    (dest 'AmiTCP:bin')
    (confirm)
)

(copylib
    (prompt 'Updating Stopnet')
    (help @copylib-help)
    (source 'Updates/Stopnet')
    (dest 'AmiTCP:bin')
    (confirm)
)
;;;
;;; Copy Documentation
(foreach 'Updates' '#?.guide'
    (copylib
        (prompt 'Updating Documentation')
        (help @copylib-help)
        (source (tackon 'Updates' @each-name))
        (dest 'AmiTCP:doc')
        (confirm)
    )
)
;;;
;Copy User files to AmiTCP:db
(foreach 'Updates' 'User-#?'
    (if (= 0 (exists (tackon 'AmiTCP:db' @each-name)))
        (copyfiles
            (prompt (cat 'Copying ' @each-name))
            (help @copyfiles-help)
            (source (tackon 'Updates' @each-name))
            (dest 'AmiTCP:db')
        )
    )
)

(message '\n\nThe updated Wirenet software has now been installed.')
(exit (quiet))